AHB124 Water Pipe Heating Cable

Pipes must be at least 3 ft (0.9 m) long and at least 3/8 in (9.5 mm) and no more than 1-1/2 in (38.1 mm) in diameter. For pipes of other sizes, please refer to the product selection guide for other cable options.

• Measure your pipe straight along the bottom of a horizontal pipe or on the "weather side" of a vertical pipe (including valves)
• If a cable suitable for your pipe is unavailable or out of stock, you can use two cables together on one pipe
• Keeps water flowing at ambient temperatures down to -40 deg F (-40 deg C)
• Cables are rated at 7 W per foot (0.30 m)
• Built-in thermostat turns on at 38 deg F (3 deg C) or below and turns off at 45 deg F (7 deg C) and above
• Plugs into a standard 120 VAC outlet, must be GFCI protected
• Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
• Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in Dia
• Pre-assembled and ready to install
• Integral thermostat saves energy by powering the cable only when needed

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/EasyHeat_AHB_124_Specification_Sheet.pdf